Stogra – Stepper Drive – WSE 04.230AC V01 and WSE 06.230AC V01
Mains ready stepper motor power amplifiers WSE 04.230AC V01 and WSE 06.230AC V01
Power amplifiers WSE 04.230 AC V01 and WSE 06.230 AC V01 – mains ready:
Maximum power in smallest housing. Compact metal housing also for small switch cabinets – available as rail mounting or panel mounting unit. Power amplifier with very low dissipation due to newest Power-MOSFET-technology. No forced draft necessary. Cost effective system due to connection direct to the line (without isolated transformer) – 325VDC motor operating voltage. Optimal with STÖGRA motor series SM 87, SM 88 and SM 107 (with new internal winding design suitable for 325VDC operation). The motor power at 2A and 325VDC is comparable with 8A / 80VDC at standard DC-supplied motor / amplifier systems, 4A and 325VDC compares to 12A / 110VDC, and 6A and 325VDC compares to 12A / 160 VDC at standard systems. Via DIP-switch selectable are different step angles from 200 to 12800 steps/revolution – microstepping for true and smooth running of the motor. Phase current adjustable via switch from 0 to 4A / Phase – at version WSE 06.230AC V01 from 0 to 6A / phase.
Mains ready stepper motor power amplifiers WSE 04.230AC V01 and WSE 06.230AC V01
Power amplifiers WSE 04.230 AC V01 and WSE 06.230 AC V01 – mains ready:
- Maximum power in smallest housing
- Compact metal housing also for small switch cabinets – available as rail mounting or panel mounting unit
- Power amplifier with very low dissipation due to newest Power-MOSFET-technology
- No forced draft necessary
- Cost effective system due to connection direct to the line (without isolated transformer) – 325VDC motor operating voltage
- Optimal with STÖGRA motor series SM 87, SM 88 and SM 107 (with new internal winding design suitable for 325VDC operation)
- The motor power at 2A and 325VDC is comparable with 8A / 80VDC at standard DC-supplied motor / amplifier systems, 4A and 325VDC compares to 12A / 110VDC, and 6A and 325VDC compares to 12A / 160 VDC at standard systems
- Via DIP-switch selectable are different step angles from 200 to 12800 steps/revolution – microstepping for true and smooth running of the motor
- Phase current adjustable via switch from 0 to 4A / Phase – at version WSE 06.230AC V01 from 0 to 6A / phase
- Easy connections via screw terminals and spring loaded terminals at the front side for motor, mains and control signals
- Electronic protection against short circuit (motor and power amplifier), over temperature (power amplifier) and under voltage
- Output ready signal via relay
- All input signals (pulse, direction, reset, boost, disable, switch step angle) are galvanically isolated via optocouplers
