Trio – Flexslice Coupler (P366)

The Flexslice system begins with the coupler.

The coupler is connected to the network via the upper Ethernet interface. The lower RJ45 socket may be used to connect further EtherCAT devices in the same strand.

The bus coupler supports up to 16 input/output modules which have a positive mechanical lock and bus connector, making a reliable EBUS connection through the backplane. The complete assembly can be DIN rail mounted. The coupler converts the passing telegrams from Ethernet 100BASE-T to EBUS signal format.

In the EtherCAT network, the P366 coupler can be installed in any position in the Ethernet string; making it suitable for operation close to the master or at a remote position.

Trio

Features

  • Use with Trio or 3rd Party EtherCAT Masters
  • High performance, flexible topology and simple configuration.
  • Bus cycle time synchronised with Motion Coordinator Servo Period.
  • Bus coupler module with 2 x RJ45 Ethernet ports for EtherCAT connection.
  • EtherCAT protocol remains fully intact down to individual modules using the E-bus system.
  • I/O functions tightly synchronised to motion using EtherCAT distributed clocks.
  • Automatic mapping to the Motion Coordinator I/O system.
  • DIN rail mounted.
  • Multiple practical push-in connector options – No break outs required.
  • Clip-together design with ‘quick release’ locks for mechanical integrity.
  • User labelling facility
  • Machine builder custom functionality options

Downloads

Catalogue
Flexslice