RTA – ADW – Open-Frame, Stepping Motor Drive

  • ADW is the R.T.A. electronic drive designed for all applications where accurate SPEED CONTROL is needed.
  • The motor velocity can be regulated in 3 ways:
    – Analog voltage input
    – External potentiometer
    – Internal speed settings
  • The extended ADW power range (24-75 VDC, 0.65 – 6.0 Amps) and its versatility (4 Modes of Operation) allow to access to a wide variety of application fields.
Categories: ,
RTA

Introduction

  • ADW is the R.T.A. electronic drive designed for all applications where accurate SPEED CONTROL is needed.
  • The motor velocity can be regulated in 3 ways:
    - Analog voltage input
    - External potentiometer
    - Internal speed settings
  • The extended ADW power range (24-75 VDC, 0.65 - 6.0 Amps) and its versatility (4 Modes of Operation) allow to access to a wide variety of application fields.

Highlights

  • Any speed-regulated applications with variable or pre-set velocity setting.
  • Conveyors:
    - Single belt transport
    - Multi belt transport with high precision position/speed synchronization.
  • Jog or adjustment movements.

Technical Specifications

  • Version: open frame drive in 122 x 93.5 x 25 mm, equipped with AMP connectors.
  • Range of operating voltage: 24-75 VDC.
  • Range of current: 0.65-6 Amp. Easy setting of values by means of a dip-switch.
  • Wide speed range: 0.8 rpm to 2,000 rpm. Continous operation zone up to approx 400 rpm, depending on motor choice.
  • 64 internally selectable preset speed.
  • 0-5Vdc or 0-10Vdc selectable analog command range.
  • Low & High-speed motion profile.
  • Adjustable internal acceleration/deceleration ramp.
  • Voltage source for potentiometer available at connector.
  • Auto-stop function.
  • All opto-insulated digital inputs.
  • Sync-out for multi-Axis synchronization.
  • Over-voltage, short-circuit and thermal protection.
  • Warranty: 24 months.
Model Name Drive Type Bus Voltage Range (Volt.) Phase Current Range (Amp.)  Dimensions (mm.) Suggested Motors (Flange size) 
ADW 04 ANALOG INPUT 24 - 75 VDC 0.65 - 2.0 Open frame drive 122 x 93.5 x 25 mm AMP connectors NEMA 17, NEMA 23, 60 mm. NEMA 34
ADW 04.V ANALOG INPUT 24 - 75 VDC 0.65 - 2.0 Open frame drive 122 x 93.5 x 25 mm Screw-type connectors NEMA 17, NEMA 23, 60 mm. NEMA 34
ADW 06 ANALOG INPUT 24 - 75 VDC 1.9 - 6.0 Open frame drive 122 x 93.5 x 25 mm AMP connectors NEMA 17, NEMA 23, 60 mm. NEMA 34
ADW 06.V ANALOG INPUT 24 - 75 VDC 1.9 - 6.0 Open frame drive 122 x 93.5 x 25 mm Screw-type connectors NEMA 17, NEMA 23, 60 mm. NEMA 34

 

 

Downloads

Catalogues