RTA – ADW – Boxed, Stepping Motor Drive
- ADW is the R.T.A. electronic drive designed for all applications where accurate speed control is needed.
- The motor velocity can be regulated in 3 ways:
– Analog voltage input
– External potentiometer
– Internal speed settings - The extended ADW power range (24-75 VDC, 0.65 – 6.0 Amps) and its versatility (4 Modes of Operation) allow to access to a wide variety of application fields.
Introduction
- ADW is the R.T.A. electronic drive designed for all applications where accurate speed control is needed.
- The motor velocity can be regulated in 3 ways:
- Analog voltage input
- External potentiometer
- Internal speed settings - The extended ADW power range (24-75 VDC, 0.65 - 6.0 Amps) and its versatility (4 Modes of Operation) allow to access to a wide variety of application fields.
Highlights
- Any speed-regulated applications with variable or pre-set velocity setting.
- Conveyors:
- Single belt transport
- Multi belt transport with high precision position/speed synchronization. - Jog or adjustment movements.
Technical Specifications
- Version: drive housed in a 129 x 110 x 34 mm metallic box, equipped with Phoenix connectors.
- Range of operating voltage: 24-75 VDC.Range of current: 0.65-2 Amp. Easy setting of values by means of a dip-switch.
- Wide speed range: 0.8 rpm to 2,000 rpm. Continous operation zone up to approx 400 rpm, depending on motor choice.
- 64 internally selectable preset speed.
- 0-5Vdc or 0-10Vdc selectable analog command range.
- Low & High-speed motion profile.
- Adjustable internal acceleration/deceleration ramp.
- Voltage source for potentiometer available at connector.
- Auto-stop function.
- All opto-insulated digital inputs.
- Sync-out for multi-Axis synchronization.
- Over-voltage, short-circuit and thermal protection.
- Warranty: 24 months.
| Model Name | Drive Type | Bus Voltage Range (Volt.) | Phase Current Range (Amp.) | Dimensions (mm.) | Suggested Motors (Flange size) |
| ADW 94 | ANALOG INPUT | 24 - 75 VDC | 0.65 - 2.0 | Box 129 x 110 x 34 mm | NEMA 17, NEMA 23, NEMA 34, NEMA 60, |
| ADW 96 | ANALOG INPUT | 24 - 75 VDC | 1.9 - 6.0 | Box 129 x 110 x 34 mm | NEMA 17, NEMA 23, NEMA 34, NEMA 60, |
